DNYSYSJ 4-Stroke 1 Inch Gas-Powered Water Transfer Pump Model: WP 10-140F Engine Model: 140F-3 Engine Type: Single-cylinder, air-cooled, 4-stroke gasoline engine Engine Displacement: 38cc Start Mode: Pull start Main Parameters of Water Transfer Pump Maximum Power & Speed: 1.2kw, 8500r/min Fuel Tank Volume: 650ml Engine Oil Tank Volume: 80ml Maximum Suction Range: 7m Maximum Lift: 30m Packing Size: 38x35x30cm/14.96*11.81*13.78in Product Size: 36*28*32cm/14.17*11.02*12.60in Note After each work, run at idle speed for 2-3 minutes, and turn off the engine after the engine temperature drops to increase the service life. Suitable Water Pipe Size: Water Pump Inlet: 1” (25mm) Pump Outlet: 1” (25mm) Flow Rate: 8000L/hour Gross/net Weight: 10kg/8.2kg Read more Package Including Water Transfer Pump Hose Clamps and Accessories English User Manual Wide Application Gas-Powered Water Transfer Pump is widely used for water intake from wells, long-distance water transportation to farmland, large area of gardens, sprinkler irrigation, fire fighting water, digging lotus root, aquaculture, etc. Water Pump Made From Non-corrosive Marine Grade Aluminum and Alloy Hose Fittings. Smooth Running Dual Ring / Twin Counter Balance Crank, Extra-wide Base for Stability. Excellent Engine Design, Corrosion Resistance, Wear Resistance, Low Heat. Built in Solid Alloy Pump and Impeller. Read more Use & Maintenance First use: Choose genuine four-stroke gasoline engine oil and add it to the engine oil tank, about 80ml. Replace it every 100 working hours in the future. Fill the fuel tank and engine oil tank with gasoline and engine oil respectively. Turn on the oil circuit switch. Open the water filling cover above the water pump. Fill up the water diversion, use the card link to connect the water inlet pipe (note that all connections of the water inlet pipe cannot leak. Air leakage will cause the water to be unable to absorb). Close the damper and pull the starter. After starting, open the throttle and increase the throttle to start working. (If there are signs of starting but failed to start, please open the damper and continue to pull the starter) Good use and maintenance habits. It will make your machine work more efficiently. Read more 4-Stroke 1 Inch Gas-Powered Water Transfer Pump 43CC 1.7HP Petrol Gasoline High Flow High Pressure water Pump 43CC 2HP 2-Stroke Gas Gasoline Water Pump 7.5HP 3 inch Gasoline Engine Semi-Trash Water Pump 210CC 3 Inch 4-Stroke 7.5HP Gasoline Water Pump Pump Outlet 1 Inch 1 Inch 1 Inch 3 Inch 3 Inch Engine Displacement 38CC 43CC 43CC ✓ 210CC Engine Power 1.2KW 1.25KW 1.25KW 3.5KW 4KW Engine Type single-cylinder, air-cooled,4-stroke gasoline engine 43cc 1.7hp 2-stroke air-cooled, 2-stroke,single cylinder gasoline 7.5HP 3 inch Gasoline Engine Semi-Trash Water Pump 210CC 3 Inch 4-Stroke 7.5HP Gasoline Water Pump